Product ID:HYDRO LASTIC, 078193
MSDS Date:05/11/1988
FSC:8010
NIIN:00N016133
MSDS Number: BKRTB

M A BRUDER & SONS INC

600 REED ROAD
BROOMALL, PA 19008
US

Emergency Phone: 215-353-5100 215-853-2051

Info Phone: 215-353-5100

Cage: 85519

M A BRUDER & SONS INC

600 BROOMALL, PA 19008 US

Telephone: 610-353-5100;610-359-3635

Cage: 85519

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 17-21%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

ESTER-ALCOHOL. (MFR CAS# IS PROPIONIC ACID)

CAS: 25265-77-4

Fraction By Weight: 1-3%

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 3-5%

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

WATER

CAS: 7732-18-5

RTECS: ZC0110000

ACRYLIC COPOLYMER

CAS: 25608-33-7

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: MAY CAUSE HEADACHE & NAUSEA.
SKIN/EYE: POSSIBLE PRIMARY IRRITATION (MATL IS SLIGHTLY ALKALINE)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:SEE HEALTH HAZARDS (ACUTE/CHRONIC)

First Aid:INHAL: REMOVE FROM EXPOSURE. SKIN: REMOVE MATL WITH SOAP &
WATER. REMOVE CONTAMINATED CLOTHING. EYES: FLUSH IMMEDIATELY WITH
LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. CONSULT MD FOR
SPECIAL MEDI CAL TREATMENT. INGEST: GET MD IMMED. .

Flash Point:NOT FLAMMABLE
Extinguishing Media:NONE SPECIFIED BY MANUFACTURER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE (DUE TO THE
BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:COLLECT IN CONTAINER FOR DISPOSAL. CLEAN UP
WITH WATER BEFORE ALLOWING TO DRY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP FROM FREEZING. DO NOT STORE IN
SUN OR ABOVE 120F .
Other Precautions:DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF
CHILDREN.

Respiratory Protection:NIOSH/MSHA APPROVED MECHNICAL FILTER RESPIRATOR
TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY DURING SPRAY
APPLICATION.
Ventilation:MAINTAIN ADEQUATE VENTILATION TO ENSURE AIR ENTRY DURING
APPLICATION AND DRYING.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USE PROTECTIVE SKIN CREAM IF NEEDED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHYL ETHER
Percent Volatiles by Volume:65-67

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:IF INVOLVED IN FIRE (FROM OTHER
SOURCES) COULD CONCEIVABLY RESULT IN RELEASE OF CARBON DIOXIDE &
CARBON MONOXIDE.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.